Posts

Technical discription of e-bike

Image
6.1 Hardware Design 6.1.1 Automotive Alternator The car alternator is possibly the most vital factor or piece of the  design. Without the alternator, there would be no supply of mechanical electricity to run the  electric tricycle. After deciding on an automobile alternator to be the motor for the design, it  was vital to choose the right stator coil orientation that satisfactory match the design. The figure under indicates a frequent car alternator and its foremost components. The predominant hardware factors that utilized inside the car alternator are  the rotor and the stator. The rotor of the alternator consists of a coil of wire wrapped around an iron core. DC subject contemporary produces a magnetic area round the core. The stator is a set of coils constant to the shell of the alternator. Magnetic discipline from the rotor couples to the stator coils producing modern in the stator windings. These stator coils are positioned one hundred twenty levels apart, producing three separat
Post a Comment
Read more

components of road cleaner --> Design of shaft & chain

Image
  SHAFT: Shaft is a rotating machine element, usually circular in cross section, which is used to transmit power from one part to another, or from a machine which produces power to a machine which absorbs power. Types- They are more often than not labeled into two types. • Transmission shaft • Machine Shaft Transmission shafts are used to transmit electricity between the supply and the computer absorbing power; e.g. counter shafts and line shafts. Machine shafts are the critical section of the desktop itself; e.g. crankshaft. Materials - The cloth used for everyday shafts is slight steel. When excessive electricity is required, an alloy metal such as nickel, nickel-chromium or chromium-vanadium metal is used. Shafts are usually shaped by means of hot rolling and completed to dimension through bloodless drawing or turning and grinding. Standard sizes Machine shafts Up to 25 mm steps of 0.5 m Transmission shafts 25 mm to 60 mm with 5 mm steps 60 mm to a hundred and ten mm with 10 mm
Post a Comment
Read more